Loxeal 24-18 Low Strength Threadlocker 10ml

Description
Low-strength anaerobic adhesive for sealing threads and securing nuts, bolts, and screws of all types that need to be easily disassembled. Approved by DVGW as a gas-tight sealant for threaded connections according to the European standard EN 751-1. The adhesive is highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many other chemicals.

Physical Properties

• Composition: Anaerobic methacrylate
• Color: Purple
• Fluorescence: Visible under blue light
• Viscosity (+25°C - mPa s): 800 - 1400
• Density (+25°C - g/ml): 1.05
• Maximum Thread Diameter/Gap Fill: M 24 / 0.20 mm
• Shelf Life at +25°C: 1 year in original, unopened packaging

Curing Performance
The curing speed depends on the substrate used, the gap, and the temperature. Functional strength is typically achieved after 1 - 3 hours. Full curing takes 24 - 36 hours. For passive surfaces and/or low temperatures, the use of Loxeal Activator 11 is recommended.